Proceedings of the Royal Society of London A Mathematical and Physical Sciences · 1959 · 529 citations · 0 references
EngineeringMaterials EngineeringMaterials ScienceDose-response ModelingPolymer EngineeringRadiation DosimetryAbsorbed DoseHigh-dose Radiation EffectsRadiation Damage In MaterialsExponential Family DistributionsFracture DensityFracture Density AnalysisPolyethylenePolymer Degradation Under RadiationRadiation Cross-linking EffectsRadiation CrosslinkingSolubility
The sol fraction of a cross‑linked polymer network can be expressed analytically using a generalized distribution function that reduces to uniform, exponential, or pseudo‑random distributions for λ = ∞, 1, 0. By assuming random cross‑linking and fracture proportional to radiation dose, the authors derive simple relations between sol fraction and dose, notably involving the fracture density per unit dose p₀ and cross‑linked unit density per unit dose q₀, and apply these to low‑density and high‑density polyethylene, polyvinyl acetate, polyvinyl chloride, polypropylene, and polyalkyl acrylates to determine radiation parameters and G values. They find that for polyethylene the cross‑linked unit density q₀ is essentially independent of molecular weight, branching, or crystallinity but is influenced by air, and similar q₀ values are observed for polyvinyl acetate and polyvinyl chloride.
The equation for the sol fraction ( s ) of a cross-linked polymer network becomes readily tractable when applied to special cases of the generalized distribution function n( u ) = C ( u/u 1 ) λ -1 exp ( — λu/u 1 ). For values of λ = ∞, 1 and 0 respectively, this function yields the uniform distribution, the exponential distribution and a hypothetical pseudo-random distribution. Assuming that cross-linking and fracture occur at random and in proportion to the radiation dose, simple expressions are derived relating sol fraction to radiation dose ( r ) for each of the three distributions. The most useful of these is the relation involving the fracture density per unit dose ( p 0 ) and the density of cross-linked units per unit dose ( q 0 ). s +√ s = p 0 / q 0 + 1/ q 0 u 1 r . This holds strictly for exponential distributions, whether or not main-chain fracture occurs simultaneously with cross-linking, and also holds at high doses for the other distributions considered, providing that cross-linking is accompanied by fracture. This treatment is applied to experimental results on low-density and high-density polyethylenes, polyvinyl acetates, polyvinyl chloride, polypropylene and polyalkyl acrylates. The relevant radiation parameters p 0 , q 0 and the corresponding G values are deduced. It is found, in the case of polyethylene, that q 0 is, within experimental error independent of the molecular weight, degree of branching or crystallinity, but is affected by the presence of air. Similar values of q 0 are also observed for polyvinyl acetate and polyvinyl chloride.