Propellants Explosives Pyrotechnics · 2010 · 26 citations · 1 references
EngineeringChemical EngineeringChemistryCombustionInorganic ChemistryReaction EngineeringCombustion FundamentalsCombustion ProcessesBurn Rate BehaviorBurning RateMaterial Combustibility TestingPressure Rise BehaviorSensitivityTemperature Rise AnalysisTemperature Rise Testing
Abstract Burning characteristics and sensitivity characteristics of some stoichiometric ratio guanidinium 1,5′‐ bis ‐1H‐tetrazolate (G15B)/metal oxide mixtures were examined. The linear burning rates of the G15B/CuO mixture were higher compared to other G15B/metal oxide mixtures and 5‐amino‐1H‐tetrazole(5‐ATZ)/Sr(NO 3 ) 2 mixture, although the average rate of pressure rise during the closed vessel test was lower compared to 5‐ATZ/Sr(NO 3 ) 2 mixture. The temperature rise for both G15B/CuO and G15B/MnO 2 mixtures was considerably lower than that of 5‐ATZ/Sr(NO 3 ) 2 mixture. G15B/Fe 2 O 3 mixture was the most insensitive among G15B/metal oxide mixtures during the drop hammer test, while G15B/CuO mixture was the second most insensitive. All G15B/metal oxide mixtures were insensitive against friction and electric spark discharge (ESD). Four seconds ignition temperature for G15B/CuO mixture was over 100 K lower than that of 5‐ATZ/Sr(NO 3 ) 2 mixture, but the apparent activation energy for ignition was higher. Among the G15B/metal oxide mixtures studied, G15B/CuO mixture showed the fastest burning rate, while it showed a relatively low temperature rise and low sensitivity. G15B/ZnO did not burn at all.
1