IEEE Transactions on Electromagnetic Compatibility · 2002 · 22 citations · 9 references
EngineeringElectrical EngineeringComputational ElectromagneticsElectromagneticsMicrowave EngineeringElectromagnetic CompatibilityElectromagnetic Compatibility TestingFinite Difference Time Domain AnalysisIntegrated Circuit DesignMicrowave Integrated CircuitsMicrowave MeasurementsCommon-mode Interference AnalysisConnector DesignConnector TestingElectromagnetic Disturbance CharacterizationField MeasurementsFinite Difference Time Domain ModelingFinite Difference Time Domain Simulation
Electromagnetic interference (EMI) coupling associated with inter-board connection is investigated. Two experimental techniques, based on |S/sub 21/| measurements, including both common-mode current and near-field measurements, are reported. Both methods, as well as finite difference time domain (FDTD) modeling, were used as experimental and numerical tools for inter-printed-circuit-board (inter-PCB) connector evaluation. The EMI performance of a lab-constructed stacked-card connector, and a commercially available module-on-backplane connector were studied. EMI characteristics of the connectors are demonstrated by investigating a few aspects of the design: type of shield/ground blade for signal return, number and length of ground pins, signal pin designation, etc. Good agreement is achieved between the measurements and the FDTD modeled results.
9
Journal of the Franklin Institute · 1963 · 5.8K citations
D.M. Hockanson, James L. Drewniak, T.H. Hubing et al. · IEEE Transactions on Electromagnetic Compatibility · 1996 · 274 citations
Engineering, Electrical Engineering, Computational Electromagnetics +7