Journal of Structural Engineering · 2005 · 158 citations · 4 references
EngineeringCivil EngineeringMaterials EngineeringBuilding StructuresStructural EngineeringStructural MaterialsBending Of BeamsComposite MaterialsComposite StructuresConcrete ConstructionStructural DesignStructural SystemsBendingComposite ActionComposite Structural SystemsShear BehaviorShear Connector BehaviorShear Properties Of CompositesStructural EfficiencyWood-concrete Composite Systems
The study introduces a novel wood–concrete composite system. The system joins a wood component to a concrete slab using a continuous steel mesh that is glued into a slot in the wood and embedded in concrete, and its shear connector performance was evaluated by static push‑out tests and a full‑scale 10‑m bending test. The steel‑mesh connector delivers stiff yet ductile shear performance, enabling the composite beam to achieve 97 % of the effective stiffness and 99 % of the strength of a fully composite beam, representing a marked improvement in efficiency and superiority over existing systems.
This paper introduces a new, structural wood–concrete composite system. The system is formed by joining a wood component, such as a floor beam or laminated plate, to a concrete slab utilizing a continuous steel mesh of which one half is glued into a slot in the wood while the other half is embedded into the concrete. Two series of tests were performed and are presented: static push-out tests (to establish shear properties of the connector) and a full scale bending test with a span of approximately 10m. Test results reveal that the steel mesh performs favorably—as a stiff yet ductile shear connector between the wood and the concrete. Design equations, per European standards (in absence of North American standards) are described and used to predict the failure load of the bending test. Calculations indicate that the tested beam performs with near full composite action—specifically, 97% effective stiffness and 99% strength of that of a beam with full composite action. This is a marked improvement in the efficiency of wood–concrete systems developed to date. The system shows itself to be superior to alternative systems in its high structural efficiency as well as being relatively easy to install and economic.
4
Timber–concrete composite structures
Ario Ceccotti · AirIuav (Università Iuav di Venezia) · 1995 · 96 citations