Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · 2000 · 76 citations · 10 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsRheologyTribologyLubricant PropertiesLubricant RheologyLubrication EngineeringLubrication SystemsElastohydrodynamic LubricationFilm FormationFilm ThicknessGrease LubricationLubricationOptical InterferometryOptimum TemperatureTemperature Optimum
The effects of the thickener structure and base oil viscosity on the grease film formation in rolling point elastohydrodynamic contacts have been discussed on the basis of direct observation using the optical interferometry technique. Three different types of diurea greases without additives have been used as test greases. As the base oils three kinds of ether-type synthetic oils having similar molecular structures but different viscosities were used. The film behaviour of fresh greases has also been compared with that of the degraded greases. It has been found that the behaviour of grease elastohydrodynamic lubrication films is basically influenced by the thickener structure and base oil viscosity. The adhesion or deposition of the thickener on the contacting surfaces and oil starvation which affect film formation depend on the thickener structure, base oil viscosity and rolling speed. Furthermore, it has been suggested that there is an optimum temperature which gives a maximum film thickness according to the consistency of the grease.
10
Optical Analysis of Ball Bearing Starvation
L. D. Wedeven, D. M. Evans, A. Cameron · Journal of Lubrication Technology · 1971 · 315 citations · Full text
Engineering, Physics, Optics +12
N. Maw · Journal of Mechanical Working Technology · 1982 · 165 citations
The behaviour of greases in elastohydrodynamic contacts
P. M. Cann, B. P. Williamson, R. C. Coy et al. · Journal of Physics D Applied Physics · 1992 · 63 citations