Green Chemistry · 2010 · 101 citations · 35 references
Natural SciencesChemical EngineeringChemistryCatalysisInorganic ChemistryReaction EngineeringCatalyst CharacterizationCatalyst PreparationCatalytic MaterialsCatalytic Reaction EngineeringHeterogeneous CatalysisSupported CatalystsBimetallic CatalysisBimetallic CatalystsCopper CatalysisMetal CatalystsMetal Oxide CatalystsMild Reaction ConditionsSupported Bimetallic CatalystsSupported Metal Catalysts
Supported Cu-containing bimetallic catalysts were prepared and used to convert glycerol to propanediols. The effects of supports, metals, metal loadings, and impregnation sequences were examined. A synergistic effect was observed between Cu and Ag when they were impregnated on γ-Al2O3. Characterizations revealed that the addition of Ag not only resulted in an in situ reduction of CuO, but also improved the dispersion of the Cu species on the support. A CuAg/Al2O3 catalyst with optimal amounts of Cu and Ag (Cu/Ag molar ratio 7 : 3, 2.7 mmol Cu+Ag per gram of γ-Al2O3) showed a near 100% selectivity to propanediols with a glycerol conversion of about 27% under mild reaction conditions (200 °C, 1.5 MPa initial H2 pressure, 10 h, (Cu+Ag)/glycerol molar ratio of 3/100). Compared with a commercial copper chromite catalyst commonly used for this reaction, the CuAg/Al2O3 catalyst had much higher activity and did not need a reduction pretreatment.
35
Improved utilisation of renewable resources: New important derivatives of glycerol
Arno Behr, Jens Eilting, Ken Irawadi et al. · Green Chemistry · 2007 · 1.3K citations
Glycerol hydrogenolysis on heterogeneous catalysts
Julien Chaminand, Laurent Djakovitch, Pierre Gallezot et al. · Green Chemistry · 2004 · 477 citations