IEEE Transactions on Applied Superconductivity · 1999 · 160 citations · 2 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsMetallic MaterialsThin FilmsMetalsThin Film Electrical PropertiesThin-film DepositionThin-film MaterialsBuffer LayersCritical Current DensityCritical Current PerformanceCurrent DensityDeposition RateFull Width At Half MaximumMetal Thin FilmsThermal Evaporation
We successfully deposited high quality YBCO films on metal tapes with biaxially aligned MgO buffer layers. e-gun evaporation on inclined substrates with a very high deposition rate of up to 250 nm/min was used for the deposition of the buffer layers. The MgO layers are biaxially textured with an in-plane full width at half maximum of 80. The MgO [001]-axis is not parallel to the substrate normal but tilted significantly towards the deposition direction. YBCO films were deposited on ISD buffer layers by reactive thermal co-evaporation. The critical current density of the films was found to be anisotropic due to the tilt of the [001]-axis. Critical current densities up to 7.9/spl times/10/sup 5/ A/cm/sup 2/ at 77 K were achieved.
2
YBCO film deposition on very large areas up to 20×20 cm2
H. Kinder, P. Berberich, W. Prusseit et al. · Physica C Superconductivity · 1997 · 86 citations
Natural Sciences, Materials Engineering, Materials Science +12
Y-123 Films on technical substrates
H.C. Freyhardt, J. Hoffmann, J. Wiesmann et al. · Applied Superconductivity · 1996 · 24 citations
Natural Sciences, Materials Engineering, Materials Science +8