Design and Performance of Transmit Filters Using HTS Bulk Resonators for IMT-Advanced Applications

A. Saito, Hidekazu Teshima, H. Obara, Satoshi Ono, Masato Kimura, N. Sekiya, H. Hirano, Satoshi Hirano, Shigetoshi Ohshima

IEEE Transactions on Applied Superconductivity · 2007 · 31 citations · 11 references

Concepts

Abstract

A transmit band pass filter using circular-disk high-temperature superconductor (HTS) bulk resonators was designed with a 5.0 GHz center frequency and a 100 MHz bandwidth for use in international mobile telecommunication (IMT) advanced applications. The frequency response and electromagnetic field were calculated using a three-dimensional simulator. The mode of the resonator was used because it had the smallest diameter. Using stripline (SL) resonators enhanced both the unloaded quality factor and the coupling between the input/output ports and resonators. The frequency response of the designed SL 3-pole Chebyshev filter meets the requirements of IMT-Advanced applications. Additionally, the maximum surface current of the HTS bulk filter was approximately 86% less than that of a conventional hairpin filter.

References

11