IEEE Transactions on Antennas and Propagation · 2008 · 125 citations · 12 references
EngineeringElectrical EngineeringAntennasMicrowave EngineeringWireless CommunicationsAntenna DesignBroadband AntennasMicrowave AntennasPlanar AntennasSlot AntennasSmall AntennasBroadband Antenna DesignBroadband Antenna MeasurementsBroadband Slot AntennasExperimental Results InterpretationMicrowave Antenna DesignPrinted Broadband AntennasPrinted Slot AntennasSize
The band-rejected designs of the printed open slot antenna for wireless local area network (WLAN)/worldwide interoperability for microwave access (WiMAX) applications are investigated. First, the broadband characteristic (2.3 ~ 6uarr GHz) of open slot antenna design with small size is implemented and measured. Then, inserted a single strip on the broadband antenna is studied and investigated. By inserting a strip on the printed open slot of the broadband antenna, to reject frequency from 3.56 to 4.58 GHz, a dual-broadband design of the open slot antenna with small size is obtained for WLAN applications in the 2.4 GHz (2400-2484 MHz) and 5 GHz (5150-5825 MHz) bands. Furthermore, by inserting two strips of different length on the open slot antenna, a three-band antenna is achieved. By adjusting the dimension of two strips on open slot antenna, a three operating modal frequencies at 2.37 ~ 2.72,3.31 ~ 3.78, and 4.5 ~ 5.97 GHz for WiMAX application have been obtained. Detailed design steps and experimental results for the designs are studied and investigated in this paper.
12
Band-notched UWB planar monopole antenna with two parasitic patches
Kyeong‐Hwa Kim, YJ Cho, S.-H. Hwang et al. · Electronics Letters · 2005 · 287 citations
Experimental studies of printed wide-slot antenna for wide-band applications
Liu, Lau, Quan Xue et al. · IEEE Antennas and Wireless Propagation Letters · 2004 · 229 citations