IEEE Journal of Solid-State Circuits · 1999 · 99 citations · 17 references
EngineeringElectrical EngineeringAnalog ElectronicsMicroelectronicsSystem-on-chip DesignAnalog Integrated CircuitsCmos Circuit DesignDigital Integrated CircuitsDigital Signal ProcessingMixed-signal Integrated Circuit DesignRadio-frequency Integrated CircuitsAnalog-digital ConversionAnalog-to-digital ConversionAnalog-to-digital Converter DesignCmos Analog Integrated CircuitsIntermodulation AnalysisIntermodulation DistortionRadio-frequency Integrated Circuit DesignSigma-delta Modulator Modeling
This paper presents a sixth-order continuous-time bandpass sigma-delta modulator (SDM) for analog-to-digital conversion of intermediate-frequency signals. An important aspect in the design of this SDM is the stability analysis using the describing function method. The key to the analysis is the extension of the linear gain model for the sampled quantizer with a phase uncertainty. The single-loop, one-bit SDM is tuned at 10.7 MHz, is sampled at 40 MHz, and achieves 67-dB signal-to-(noise+distortion) ratio in 200 kHz and 80 dB in 9 kHz. The third order intermodulation is at -82 dBc for a -13-dBFS input level. The 0.5-/spl mu/m CMOS chip occupies 0.9/spl times/0.4 mm/sup 2/ and consumes 60 mW at 3.3 V (digital) and 5.0 V (analog). The sample frequency is variable and can be set from 30 to 80 MHz.
17
Theory and Application of the Z-Transform Method
Richard Bellman, E.I. Jury · Econometrica · 1965 · 715 citations
Theory and Application of the Z-Transform Method
K.W. Cattermole · Electronics and Power · 1965 · 655 citations
An Introduction to Number Theory.
Kenneth Ireland, Harold Stark · American Mathematical Monthly · 1971 · 212 citations