Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy · 2011 · 59 citations · 16 references
EngineeringMechanical EngineeringComputational Fluid DynamicsFluid DynamicsHydraulic EngineeringHydraulic MachineryHydraulic SystemsTurbulenceTurbulent FlowVortex DynamicsCavitation PerformanceFrancis TurbinesHydraulic TurbinesLow-frequency OscillationsPressure OscillationsRotor-stator InteractionTurbine PerformanceTurbine Technology
Three-dimensional unsteady turbulent flow through the entire flow passage of a model Francis hydraulic turbine is simulated using the transition shear-stress transport turbulence model and verified with experimental data. Pressure oscillations with the original runner cone, an extended runner cone, an extended runner cone with grooves, and a round-top runner cone are analysed under five operating conditions. The computational results show that (1) runner cone design can change the distribution pattern of the vortex rope in the draft tube and narrow the zone of special pressure oscillation; (2) the dominant frequency of pressure oscillation in the draft tube at guide vane opening angle, α = 17°, is significantly decreased by runner cone design while the peak-to-peak amplitude increased; (3) varying guide vane opening alters the influence of runner cone design on pressure oscillation; (4) the modified runner cones are effective for low frequency pressure oscillations induced by the vortex rope in the draft tube but have little effect on blade frequency pressure oscillation induced by rotor–stator interaction; (5) the cavitation performance at α = 17° is decreased while that at α = 18°, 19°, and 20° is increased by runner cone design; and (6) the round-top runner cone is most effective in decreasing pressure oscillations and increasing turbine cavitation performance.
16
Detection of cavitation in hydraulic turbines
Xavier Escaler, Eduard Egusquiza, Mohamed Farhat et al. · Mechanical Systems and Signal Processing · 2004 · 398 citations · Full text