In situ strength characterisation of peat and organic soil using full-flow penetrometers

Abstract

Full-flow penetrometers have been shown to overcome problems experienced with the cone penetrometer when measuring resistance in very soft peat and organic soil, and give a much more uniform measure of resistance than the cone in fibrous peat. However, at present there is no guidance on the interpretation of strength parameters in these soils using the T-bar and ball. This paper examines the results of tests using these devices at two research sites in the Netherlands in conjunction with high-quality Sherbrooke sampling for laboratory testing. In fibrous peat, the T-bar and ball provided a more uniform measure of resistance with a lower degree of scatter than the cone. The in situ testing results have been compared with the laboratory tests to assess the range of resistance factors relating penetration resistance to the undrained shear strength (s u ) and have been shown to occupy a lower range of values than the cone penetrometer. However, penetration tests in these soils are likely to be influenced by partial drainage effects and this should be considered during testing and the subsequent interpretation of results. Recommendations are made for the use of full-flow penetrometers to obtain strength parameters in these soils.