IEEE Journal of Solid-State Circuits · 2007 · 115 citations · 11 references
EngineeringComputer EngineeringElectrical EngineeringAnalog ElectronicsLow-power DesignMicroelectronicsAnalog IntegrationCmos Circuit DesignMixed-signal Integrated Circuit DesignMixed-signal IntegrationAnalog-to-digital Converter DesignCalibration Techniques For Analog CircuitsRandom Errors
In this paper, a novel calibration method for high-accuracy current-steering DACs is presented. Different from traditional calibration methods which achieves the calibration by adjusting the current values of the current sources, our method does the calibration by dynamically rearranging the switching sequence of the current sources. Since this resequencing is performed after chip implementation, even random errors can be cancelled. In this way, the total area needed for the current sources can be greatly reduced. The 14-bit DAC has been implemented in a standard 1P6M 0.18-mum CMOS technology. The core area of the chip is around 3 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , among which the area of the current-source block is only 0.28 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . The measured SFDR is 81.5 dB at 1 MHz signal frequency and 100 MHz sampling frequency. For 2 MHz signal frequency and 200 MHz sampling frequency, the measured SFDR is 78.1 dB.
11
Tao Chen, Georges Gielen · IEEE Transactions on Circuits and Systems I Fundamental Theory and Applications · 2007 · 90 citations