American Journal of Applied Sciences · 2008 · 38 citations · 13 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsStructural MaterialsThermal AnalysisConstitutive ModelingElasticity TheoryStrength Of MaterialsStress AnalysisStress-strain BehaviorThermal StressesCylindrical Pressure VesselsDimensionless QuantitiesEngineering Stress-strain AnalysisInternal PressureInternal Pressure LoadingPoisson's RatioTemperature Gradient EffectsThermal Expansion Coefficient
An analytical solution for computing the radial and circumferential stresses in a FGM thick cylindrical vessel under the influence of internal pressure and temperature is presented in this paper. It has been assumed that the modulus of elasticity and thermal coefficient of expansion were varying through thickness of the FGM material according to a power law relationship. Nevertheless the value of the Poisson ratio was taken as constant throughout the material. In the analysis presented here the effect of non-homogeneity in FGM thick cylinder was implemented by choosing a dimensionless parameter, named β, which could be assigned an arbitrary value affecting the stresses in the cylinder. Using Maple 9.5, distribution of stresses in radial and circumferential directions for FGM cylinders under the influence of internal pressure and temperature gradient were obtained. Graphs of variations of stress versus radius of the cylinder were plotted for different values of β. Cases of pressure, temperature and combined loadings were considered separately. It was concluded that by changing the value of β, the properties of FGM could be so modified that the lowest stress levels were reached. The stresses which were produced in FGM and homogeneous material with the same boundary conditions were compared to obtain the optimum value of β.
13
Masashi Koizumi · Ceramic transactions /Ceramic transactions · 1993 · 641 citations
Engineering Analysis · 1984 · 415 citations