Journal of the American Ceramic Society · 2010 · 52 citations · 31 references
Natural SciencesMaterials EngineeringMaterials ScienceBiomaterialsCeramic MaterialsCeramicsCementitious MaterialsCeramic CompositesComposite MaterialsMicrostructure ControlPorous CeramicsPorous MaterialsCeramic FoamsFoam MicrostructureFoamingFoamsMacroporous MaterialsPore Size ControlPoresPorosity
The ability to tailor the microstructure of porous ceramics is essential in order to fulfill the requirements of various applications. Depending on the use of porous ceramics, microstructures with open or closed pores, adjustable pore sizes, and a possible self‐setting ability of the wet foam are required. We present a direct foaming method to synthesize self‐setting foams with controlled microstructures, based on our previous studies on particle‐stabilized foams. For the experimental set‐up, alumina particles were partially hydrophobized with propyl gallate and the resulting suspensions were combined with a calcium aluminate cement reaction. Pore size and the fraction of open pores can be controlled by the particle concentration and the setting rate of the cement reaction. As a result, self‐setting ceramic–cement composites with porosities ranging from 40 to 95 vol% and closed as well as open pores with sizes between 30 μm and 1 mm were achieved. Compared with other methods used to produce self‐setting inorganic macroporous materials, foams made with this method cover a wider pore size and porosity range and reach higher total porosities.
31
Bioceramics: From Concept to Clinic
Larry L. Hench · Journal of the American Ceramic Society · 1991 · 4.9K citations
Natural Sciences, Bioengineering, Biomedical Engineering +16
Ultrastable Particle‐Stabilized Foams
Urs T. Gonzenbach, André R. Studart, Elena Tervoort et al. · Angewandte Chemie International Edition · 2006 · 627 citations
Stabilization of Foams with Inorganic Colloidal Particles
Urs T. Gonzenbach, André R. Studart, Elena Tervoort et al. · Langmuir · 2006 · 368 citations