Electron Beam Welding of Cold Rolled High‐Alloy TRIP/TWIP Steel Sheets

Lars Halbauer, Rolf Zenker, Anja Weidner, Anja Buchwalder, Horst Biermann

steel research international · 2015 · 14 citations · 14 references

Concepts

Abstract

High‐alloy cold rolled TRIP/TWIP steels have a remarkable potential for crash‐relevant structures. Electron beam welding (EBW) can be regarded as being predestined for this purpose due to, among other factors, its locally limited heat input. The aim of this work is the characterization of the influence of the welding conditions on the chemical composition, the microstructure, and the mechanical properties of high‐alloy cold rolled TRIP/TWIP steels. Three CrMnNi steels are cold rolled and welded with different beam intensities. The microstructure of the weld seams (WS) and the heat‐affected zones (HAZs) is characterized by means of light microscopy and scanning electron microscopy (SEM). The mechanical properties of the welded joints are evaluated by hardness measurements and tensile testing. The weld seams are defect‐free and surrounded by narrow HAZs. The microstructures inside the HAZs exhibited recrystallization and reverse annealing effects and constituted the failure‐relevant area of the weld.

References

14