Low loss Sendust powder cores comprised of particles coated by sodium salt insulating layer

Xian Wang, Yan Nie, Zekun Feng, Rongzhou Gong, Yajie Chen, Vincent G. Harris

Journal of Applied Physics · 2015 · 16 citations · 15 references

Concepts

Abstract

Toroid-shaped Sendust powder cores were prepared from cold pressing mechanically pulverized Fe-Si-Al powder that had been coated using an inorganic insulating layer. The present work focuses on the effect of the sodium salt-coated Sendust particles upon the high frequency magnetic properties. Sendust powders, having a particle size range of ∼125 μm, exhibit a high saturation magnetization of 118.9 A·m2/kg and a low coercivity of 56 A/m. The experiments indicate that the sodium-based glass insulating layer synthesized from sodium metaphosphate and sodium metaborate can effectively reduce the change in permeability with frequency or DC bias field, yielding high effective permeability (μe) of ∼113 over a wide frequency range from 10 kHz–1 MHz. Furthermore, the effective permeability is measured at ∼27 at H = 7854 A/m, indicating stable and high effective permeability under a DC bias field. The measurements of permeability under DC bias field indicate a peak in the quality factor (Q) values corresponding to a DC-bias field of 1.5–6 (kA/m) at frequencies from 50 to 200 kHz: The effective permeability remains at ∼74. The sodium salt-coated granular cores demonstrate a core loss of 68 mW/cm3 at Bm = 50 mT and f = 50 kHz: These values compare favorably to those of silicone coated Sendust particles.

References

15