Journal of the American Ceramic Society · 2013 · 21 citations · 24 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMechanical Behavior Of MaterialsAluminum OxidesCeramic BiomaterialsComposite MaterialsGelsHydrogelsPolymerization Temperature EffectsActivation EnergyAluminaAlumina CeramicsCeramic Material PropertiesEpoxy ResinsFlexural StrengthGel CastingGelation
A gelling system based on the polymerization of epoxy resin ethylene glycol diglycidyl ether ( EGDGE ) and 3,3′‐Diaminodipropylamine ( DPTA ) was developed for gelcasting alumina ceramics. The gelation process of 50 vol% alumina‐epoxy resin suspensions were investigated in accordance with the change in temperature and epoxy resin concentration. The activation energy E a of polymerization reaction was 63.76 kJ/mol and no significant gelation was observed at 25°C during the test for 50 vol% Al 2 O 3 suspensions with 10 wt% EGDGE . With the increase in EGDGE concentration, Al 2 O 3 green bodies exhibited higher relative density, flexural strength, and Weibull modulus, reaching 64.4%, 41.03 MPa, and 12.51, respectively, when EGDGE concentration was 20 wt%. However, for sintered Al 2 O 3 bodies, the highest characteristic strength and Weibull modulus were obtained for 15 wt% EGDGE concentration, reaching 367.57 MPa and 14.52, respectively.
24
A. C. Young, Ogbemi O. Omatete, Mark A. Janney et al. · Journal of the American Ceramic Society · 1991 · 694 citations
Alumina casting based on gelation of gelatine
Yali Chen, Zhipeng Xie, Jinlong Yang et al. · Journal of the European Ceramic Society · 1999 · 117 citations