NiMo/alumina hydrodesulphurization catalyst modified by saccharose: Effect of addition stage of organic modifier

José Escobar, Ana W. Gutiérrez, María C. Barrera, José A. Colín

The Canadian Journal of Chemical Engineering · 2015 · 22 citations · 41 references

Concepts

Abstract

NiMo/Al 2 O 3 catalysts, obtained by one‐pot simultaneous impregnation, were modified by saccharose (SA, at Ni/SA = 1 mol ratio) addition. To address the influence of stage of saccharide impregnation on the hydrodesulphurization activity of sulphided catalysts, three different preparation methodologies were followed: (a) modification of already calcined (400 °C) NiMo/Al 2 O 3 by SA impregnation; (b) SA deposition directly onto the alumina support, prior to Ni + Mo impregnation; (c) simultaneous Ni + Mo + SA deposition. Materials were characterized by N 2 physisorption, X‐ray diffraction, infrared (IR) spectroscopy, UV‐vis spectroscopy, and temperature‐programmed reduction (TPR), and tested on liquid‐phase dibenzothiophene (DBT) conversion (batch reactor, T = 320 °C, P = 7.2 MPa, n ‐hexadecane as solvent). The last methodology resulted in the catalyst with the highest DBT hydrodesulphurization (HDS) activity, on a pseudo‐first order kinetic constant basis. A decreased proportion of tetrahedral Mo 6+ species due to diminished interaction with the carrier, increased reducibility of octahedral Mo 6+ , and Ni complexation as well seemed to play determining roles in the trends of the activity observed. Simultaneous saccharose addition during NiMo phase impregnation required no additional preparation steps to efficiently integrate the organic modifier.

References

41