IEEE Transactions on Antennas and Propagation · 2009 · 127 citations · 10 references
EngineeringElectrical EngineeringAntennasMicrowave EngineeringPropagationMicrowave FiltersPeriodic Electromagnetic StructuresAperture GeometryFrequency ReconfigurabilityFrequency-selective SurfacesLoop GeometryPin DiodesPolarization ChangesReconfigurable FiltersTransmission Loss Measurement
The FSS can serve as a spatial filter to reconfigure buildings’ electromagnetic architecture. The design uses square‑loop apertures with four PIN diodes positioned at 90° intervals per unit cell. The switchable FSS was experimentally shown to maintain stable frequency response across polarizations and ±45° incidence, while enabling ~10 dB additional transmission loss at resonance when the PIN diodes are switched on.
A frequency selective surface (FSS) that is electronically switchable between reflective and transparent states is tested. It can be used to provide a spatial filter solution to reconfigure the electromagnetic architecture of buildings. The FSS measurements show that the frequency response of the filter does not change significantly when the wave polarization changes or the angle of incidence changes up to ±45° from normal. The FSS is based on square loop aperture geometry, with each unit cell having four PIN diodes across the aperture at 90 degree intervals. Experiments demonstrated that almost 10 dB additional transmission loss can be introduced on average at the resonance frequency, for both polarizations, by switching PIN diodes to on from off state.
10
Minimal size FSS for long wavelength operation
E.A. Parker, J.-B. Robertson, Benito Sanz-Izquierdo et al. · Electronics Letters · 2008 · 43 citations
Engineering, Architectural Engineering, Electrical Engineering +12