Computational Aerodynamics Development and Outlook

Abstract

Introduction E is an honor and challenge to present the Dryden Lecture ..i Research for 1979. Since my topic concerns a new trend in fluid mechanics, it should not be surprising that some aspects of this paper involve basic mechanics of turbulence, a field enriched by numerous contributions of Dr. Hugh L. Dryden. Having worked in related fields of fluid mechanics during past years, and long respected both his professional contributions and personal integrity, it is a special pleasure to present this Dryden lecture. The field of computational fluid dynamics during recent years has developed sufficiently to initiate some changes in traditional methods of aerodynamic design. Both computer power and numerical algorithm efficiency are simultaneously improving with time, while the energy resource for driving large wind tunnels is becoming progressively more valuable. Partly for these reasons it has been advocated that the impact of computational aerodynamics on future methods of aircraft design will be profound. ' Qualitatively, the changes taking place are not foreign to past experience in other fields of engineering. For example, trajectory mechanics and neutron transport mechanics already have been largely revolutionized by the computer. Computations rather than experiments now provide the principal source of detailed information in these fields. The amount of reactor experimentation required has been much reduced over former years; experiments now are performed mainly on clear, physically describable arrays of elements aimed at further confirmation of computational techniques; and better designs are achieved than with former experimental methods alone. Similar changes in the relative roles of experimental and computational aerodynamics are anticipated in the future. There are three compelling motivations for vigorously developing computational aerodynamics. One is to provide important new technological capabilities that cannot be provided by experimental facilities. Because of their fundamental limitations, wind tunnels have rarely been able to simulate, for example, Reynolds numbers of aircraft flight, flowfield temperatures around atmosphere entry vehicles, aerodynamics of probes entering planetary atmospheres, aeroelastic distortions present in flight, or the propulsiveexternal flow interaction in flight. In addition, transonic wind tunnels are notoriously limited by wall and support interference; and stream nonuniformities of wind tunnels severely affect laminar-turbulent transition. Moreover, the dynamic-aerodynamic interaction between vehicle motion in flight and transition-dependent separated flow also is inaccessible to wind-tunnel simulation. In still different ways ground facilities for turbomachinery experiments are limited in their ability, for example, to simulate flight inlet-flow nonuniformities feeding into a compressor stage, or to determine detailed flowfields between rotating blades. Numerical flow simulations, on the other hand, have none of these fundamental limitations, but have their own: computer speed and memory. These latter limitations are fewer, but previously have been much more restrictive overall because the full Navier-Stokes equations are of such great complexity that only highly truncated and approximate forms could be handled in the past. In recent years the Navier-Stokes equations have begun to yield under computational attack with the largest current computers. Since the fundamental limitations of computational speed and memory are rapidly decreasing with time, whereas the fundamental limitations of experimental facilities are not, numerical simulations offer the potential of mending many ills of wind-tunnel and turbomachinery experiments, and of providing thereby important new technical capabilities for the aerospace industry. A second compelling motivation concerns energy conservation. The large developmental wind tunnels require large amounts of energy, whereas computers require comparatively