Physical Chemistry Chemical Physics · 2001 · 14 citations · 12 references
Natural SciencesChemistryMaterials ScienceCatalysisInorganic ChemistryReaction EngineeringCatalyst CharacterizationCatalytic MaterialsCatalytic MechanismsCatalytic Reaction EngineeringRedox CatalysisSupported CatalystsCatalyst MechanismsCatalytic ActivityCatalytic Activity EnhancementChromium CatalystsLoadingsMetal Oxide CatalystsSupported Hydrodesulfurization CatalystsSupported Hydrogenation Catalysts
Hydrodesulfurization (HDS) reactions of radioactive 35S-labeled dibenzothiophene ([35S]DBT) were carried out over a variety of Cr/Al2O3 with 5.5–33.3 wt.% CrO3 and over promoted Me-Cr/Al2O3 (Me/Cr = 0.4, 0.6; Me = Ni, Co and Cu) catalysts at temperatures in the range of 300–380°C and under a reaction pressure of 5.0 MPa. The HDS activity of Cr/Al2O3 catalysts increased with increasing Cr loadings to 33.3 wt.% CrO3. Moreover, both HDS and hydrogenation (HYD) activities of Cr/Al2O3 catalysts were enhanced with the addition of Ni and Co. In contrast, adding Cu to Cr/Al2O3 catalyst decreased its catalytic activity inversely. Further, the results obtained from the HDS reaction of 35S-labeled dibenzothiophene indicated that the amount of labile sulfur increased on adding Ni and Co to Cr/Al2O3 catalysts whereas it decreased on adding Cu. It is suggested, therefore, that the addition of Ni and Co weakens the strength of the chromium–sulfur bond on the sulfided Cr/Al2O3 catalyst, and brings about increases in amount of labile sulfur and in catalytic activity of the Cr catalyst.
12
Hydrogenating properties of unsupported transition metal sulphides
Michel Lacroix, N. Boutarfa, C. Guillard et al. · Journal of Catalysis · 1989 · 171 citations