IEEE Journal of Solid-State Circuits · 2006 · 122 citations · 7 references
EngineeringElectrical EngineeringMicrowave EngineeringVariable Rate TechnologyWireless CommunicationsAnalog Integrated CircuitsCmos Circuit DesignMixed-signal Integrated Circuit DesignRadio-frequency Integrated CircuitsReceiver SystemsSignal ConditioningAutomatic Gain ControlCmos Analog Circuit DesignCmos Analog Integrated CircuitsDetectorsDirect Conversion ReceiversFilteringOrthogonal Frequency-division MultiplexingVariable Gain Control
The IEEE 802.11a standard uses orthogonal frequency division multiplexing (OFDM) to allow high data rates in multipath WLAN environments. The high peak-to-average power ratio (PAPR) of OFDM signals, along with stringent settling-time constraints, make conventional closed-loop automatic gain control (AGC) schemes impractical for WLAN receivers. In a direct conversion receiver, AGC and channel-select filtering are performed by analog baseband circuitry. A baseband signal processor using a new open-loop analog gain-control algorithm for OFDM is described. The new AGC algorithm uses switched coarse gain-setting steps followed by an analog open-loop fine gain-setting step to set the final gain of variable gain amplifiers (VGAs). The AGC was implemented in a 0.18-mum CMOS process using newly designed circuits including linear VGAs, RMS detectors, and current-mode computation circuitry. Simulation and measurement results verify that the new AGC circuit converges with gain error less than 1dB to the desired level within 5.6 mus
7
The flipped voltage follower: a useful cell for low-voltage low-power circuit design
R.G. Carvajal, J. Ramı́rez-Angulo, Antonio J. López‐Martín et al. · IEEE Transactions on Circuits and Systems I Fundamental Theory and Applications · 2005 · 692 citations
Engineering, Computer Engineering, Electrical Engineering +17
A 5-GHz CMOS transceiver for IEEE 802.11a wireless LAN systems
M. Zargari, D.K. Su, C. Patrick Yue et al. · IEEE Journal of Solid-State Circuits · 2002 · 207 citations