Aqueous Dispersion and Slip Casting of Boron Carbide Powder: Effect of pH and Oxygen Content

Peter Williams, David D. Hawn

Journal of the American Ceramic Society · 1991 · 42 citations · 11 references

Concepts

Abstract

The effect of pH and oxygen content on the zeta potential, viscosity, and casting performance of fine (>3 μm) boron carbide powder is presented. X‐ray photoelectron spectroscopy of the powder revealed a surface layer of adsorbed water and oxides of boron and carbon. The soluble boric acid impurity was removed by washing the powder with water or alcohols. Electrophoresis indicated that the B 4 C surface was negatively charged in water above pH 1, but the presence of dissolved boric acid suppressed the zeta potential at high pH. Stable, low‐viscosity dispersions of >30 vol% solids were prepared and slip cast at pH >6, but boric acid was destabilizing for dispersions prepared above pH 7. The green density of slip‐cast parts was more reproducible and about 3% to 5% higher for washed powders than for high‐oxygen‐content powders.

References

11