A 1-GHz active phase shifter with a ferroelectric varactor

Abstract

An active phase shifter circuit implemented with discrete components is reported. The tuning element, a ferroelectric varactor, is a parallel plate capacitor with Ba/sub 0.5/Sr/sub 0.5/TiO/sub 3/ (BST) as the dielectric. The circuit consists of two bipolar junction transistors coupled with a feedback network, which contains the varactor and thus produces a transfer function that can be varied with a control voltage. The active nature of the circuit allows for signal gain, while the BST varactor provides a high-Q tuning element. This represents an improvement over strictly passive phase shifters with ferroelectric elements. Circuit simulation results are presented and compared with measured data from the implemented system. The network, even with markedly nonideal transistors, can provide a true all-pass response over the frequency band of interest (200-1100 MHz). The measurement results demonstrate an analog tunability of about 100/spl deg/ with a gain variation of about 0.6 dB at I GHz when using a BST capacitor with a tunability of 2.75:1.