Tunning pore filling of anodic alumina templates by accurate control of the bottom barrier layer thickness

Abstract

The role of the alumina barrier layer thickness (δ(b)) on the growth of Ni nanowires (NWs) in porous anodic alumina (PAA) has been revealed. By varying the final anodization voltage to form dendrites at the bottom of the nanoporous structure, we are able to optimize δ(b) (in the 2-16 nm range), allowing us to obtain a Ni pore filling percentage (f(p)) of almost 100% for δ(b) = 10 nm. However, deviations from this optimal δ(b)-value led to a strong decrease of f(p). Moreover, an increase of the electrodeposition efficiency (EE) and NW homogeneity was also verified for δ(b) up to 10 nm. Such increase in nominal δ(b) leads to a consistent growth rate in all pores and consequently a complete and uniform nanopore filling. On the other hand, the decrease in electrodeposition efficiency visible for δ(b) > 10 nm is related with hydrogen evolution and dielectric breakdown of the insulator layer due to the required high deposition voltages. Non-uniform NW growth is then visible, with the consequent decrease in f(p). The control of the pore filling and length homogeneity of the fabricated 1D metallic nanostructures, combined with the ability to adjust the pore dimensions of PAA, can bring novel approaches for the fabrication of nano-objects and thus exciting new applications.