Journal of Chemical Technology & Biotechnology · 2004 · 34 citations · 20 references
EngineeringChemical EngineeringChemistryAnalytical ChemistryInorganic ChemistrySeparation ProcessesExtraction TechniquesHeavy Metal RemovalSolvent ExtractionEquilibriumExtraction EquilibriaMetal ExtractionNickel ExtractionPh Effects On Metal RemovalSelective ExtractionStrippingTemperature Effects On Extraction
Abstract DP‐8R and ACORGA M5640 extractants diluted in Exxsol D100 were used to co‐extract cobalt and nickel from aqueous acidic sulfate media. The influences of equilibration time, temperature, equilibrium pH and reagent concentrations on the extraction of both metals have been studied. It was observed that both cobalt and nickel extraction are slightly sensitive to temperature but are pH dependent. Metal extraction equilibria are reached within about 5 min contact time. In addition, cobalt extraction depends on the extractant concentration in the organic phase. For a solution containing 0.5 g dm −3 each of cobalt and nickel and an initial pH of 4.1, conditions were established for the co‐extraction of both metals and selective stripping (with H 2 SO 4 ) of cobalt and nickel. Using the appropriate reagent concentrations the yield (extraction stage) for both metals exceeded 90%, and stripping of cobalt and nickel was almost quantitative. Copyright © 2004 Society of Chemical Industry
20
Principles and practices of solvent extraction
Karl Schügerl · Journal of Chromatography A · 1993 · 399 citations