Modeling of control loop behavior of magamp post regulators

I.J. Lee, D.Y. Chen, Y.-P. Wu, C. Jamerson

2003 · 12 citations · 10 references

Concepts

Abstract

Small-signal control models are presented for a magamp switching-mode post regulator. Two commonly used current reset schemes are considered: an external reset scheme and a self-reset scheme. Models for both continuous and discontinuous modes of operation are presented. It is mathematically shown that the open-loop gain is a two-pole, single-zero transfer function for continuous-mode operation and a single-pole function for discontinuous-mode operation. The equations for predicting the loop gains for both types of reset circuits are derived and verified experimentally. It is shown that the loop gain characteristics of a magamp regulator depend on power circuit parameters, the reset circuit parameters, and the saturable reactor parameters. Therefore, in a normal design procedure of a magamp, if the design parameters of the saturable reactor are changed, a corresponding change of the compensation network must be made to optimize the control performance. The models presented provide the designer with a tool to facilitate the feedback loop design of a voltage-mode magamp post regulator.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

References

10