International Journal of Systems Science · 2001 · 22 citations · 12 references
EngineeringWater Resources ManagementHydraulicsIrrigation EngineeringIrrigation ManagementAdaptive ControlControl TheoryIrrigationIrrigation HydraulicsIrrigation SystemsRiver HydraulicsCanal Control StructuresCanalsControl Structure DesignFlow Control In IrrigationGate Operation In Irrigation CanalsHydraulic System ControlPredictive ControlWater Level Regulation
This paper presents the design of a predictive controller for decentralized control of an irrigation canal. The overall canal is decomposed into N subsystems (reaches) separated by a control structure (gate). The subsystems are interdependent because flow through the structures depends on both up- and downstream water levels. Here, predictive control theory is used to formulate a set of local controllers for the automatic operation of each reach gate. The control scheme presented explicitly takes into account the interactions among subsystems. The objective of each controller is to maintain the downstream end water level of each reach at a constant target value under external perturbation. To evaluate the controller performance in realistic conditions, it is tested on an open-canal flow non-linear model. The case study considered deals with eight canal reaches.
12
Generalized predictive control—Part I. The basic algorithm
D.W. Clarke, C. Mohtadi, P.S. Tuffs · Automatica · 1987 · 3.8K citations
Properties of generalized predictive control
Douglas J. Clarke, C. Mohtadi · Automatica · 1989 · 589 citations
Properties of Generalized Predictive Control
D.W. Clarke, C. Mohtadi · IFAC Proceedings Volumes · 1987 · 577 citations
Test Cases for Canal Control Algorithms
A. J. Clemmens, Timothy F. Kacerek, B. Grawitz et al. · Journal of Irrigation and Drainage Engineering · 1998 · 171 citations