Structure–property relationships of thermally bonded polypropylene nonwovens

Abstract

Abstract The effect of fiber structure and morphology on the resultant mechanical and low load deformation properties of thermally bonded nonwoven polypropylene fabrics has been studied. Commercially available staple polypropylene fibers varying in linear density and draw ratio (Herculon and Marvess staple fibers) were used in this study. The orientation of these fibers was characterized by birefrigence measurements. Differential scanning calorimetry measurements were made to determine the heat of fusion and melting point of fibers. Experiments confirm that tensile strength and stiffness of the fabrics correlate with this fiber structure. Under the same bonding conditions fabrics made from fibers with low draw ratios show higher tensile strength and stiffness than do fibers with high draw ratios. The mechanical properties of fabrics were found to be greatly affected by the thermal bonding temperature. The tenacity and flexural rigidity of fabrics made from poorly oriented fibers show higher values than those made from highly oriented fibers. The shrinkage of the fabrics was observed to increase with increasing bonding temperature in both machine and cross machine directions. The changes in fabric thickness due to the thermal bonding are considerably lower for poorly oriented fibers.