Effects of structural details on delamination and fatigue life of fiberglass laminates

J. F. Mandell, Daniel Samborsky, Mark Scott, Douglas Cairns

1998 · 11 citations · 4 references

Concepts

Abstract

Laminates fabricated from stranded glass fiber fabrics commonly used in wind turbine blades have recently been found to exhibit a strong sensitivity to fiber content The tensile fatigue resistance decreases rapidly over a narrow range of fiber volume fraction as the fiber content is increased. This transition is typically in the range of 40 to 50 percent fiber by volume, depending on the fabric and laminate configuration. Many manufacturing processes produce fiber contents in this range, and local variations in fiber content around details such as stiffeners are often not well controlled. Thus, the fatigue resistance around structural details may drop precipitously if the fibers are locally pinched during manufacturing. A second problem associated with structural details is delamination between plies of fabric due to out-of-plane stresses. Delamination can lead to breakdown of a structure directly, often with subsequent buckling, or indirectly, by accelerating fatigue breakdown of the fiber strands. This paper explores the fatigue resistance of a number of structural details which may be associated with local increases in fiber content as well as delamination. The structural details investigated include ply drops, skinstiffener intersections, local matrix rich and transverse fiber areas, and surface indentation. These are compared to unflawed laminates and laminates containing severe flaws such as through-thick ness holes. The results are represented in two ways. First, as the strain required to produce a one-inch delamination in 10s cycles; and second, as knockdown factors on the maximum strain to produce total laminate failure in 10 6 cycles. The strain levels to produce a one-inch delamination in 10s cycles varied from

References

4