2003 · 13 citations · 5 references
EngineeringElectrical EngineeringAnalog ElectronicsMicroelectronicsSemiconductor DevicesIntegrated Circuit DesignMicrowave AmplifiersMicrowave Integrated CircuitsMicrowave Semiconductor DevicesRadio-frequency Integrated CircuitsTransistor BiasingBias Circuit DesignBiasing TechniquesGainLow-noise AmplifiersMicrowave Amplifier DesignNoise In AmplifiersTemperature DependenceTwo-stage Amplifier Design
In this paper, a Ku-band low-noise MMIC amplifier is presented, which is equipped with a bias circuit that compensates not only temperature dependence of the FETs' gain but also gain variation between chips due to process variations. The Ku-band low noise MMIC amplifier with proposed gate-bias circuit was designed and manufactured. It was proved that the proposed bias circuit reduced the temperature dependence of the two-stage MMIC amplifier's gain from 1.4 dB/100 K to 1.0 dB/100 K. The chip area consumed for the bias circuit is less than 10% of the total chip size of 1.17 mm/sup 2/. The gain variation between chips was reduced to 0.25 dB in RMS. This amplifier is suitable for active phased array applications.
5
High gain-density K-band p-HEMT LNA MMIC for LMDS and satellite communication
Y. Mimino, M. Hirata, Ko Nakamura et al. · 2002 · 51 citations
Low cost MMIC DBS chip sets for phased array applications
Jack Wallace, H.J. Redd, Robert J. Furlow · 2003 · 46 citations
High gain-density K-band P-HEMT LNA MMIC for LMDS and satellite communication
Y. Mimino, M. Hirata, K. Nakamura et al. · 2002 · 20 citations