IEEE Sensors Journal · 2005 · 123 citations · 4 references
EngineeringAerospace EngineeringElectrical EngineeringAircraft StructuresAvionicsPower ElectronicsAircraft Electrical SystemsElectrical System TestingFault DetectionTransmission LinesAircraft Wiring SystemsArc Fault DetectionElectrical Arc DetectionFault Localization AlgorithmsIntermittent FaultsShort-circuit Fault Detection
Spread spectrum methods are an important emerging class of sensors that have the potential to locate small, intermittent faults on energized aircraft power circuit wires. Previous work has demonstrated the use of these methods for hard faults (open and short circuits). This paper extends that work to the location of typical intermittent faults that plague aircraft maintainers. Test results on 200-ft-long realistic aircraft wires demonstrate the feasibility of these techniques to locate both wet and dry arcs while the system is powered with 400-Hz 115-V ac power running a variety of aircraft lighting loads. The capability of the system to function with either the aircraft structure or a paired wire as the return path to ground is demonstrated. These results indicate that spread spectrum methods have significant promise for locating intermittent faults on wires as they occur in flight or other modes of operation, such as landing and takeoff, taxiing, and other critical times when possible vibration, etc., may cause intermittent faults.
4
Down to the wire [aircraft wiring]
Cynthia Furse, Randy L. Haupt · IEEE Spectrum · 2001 · 149 citations
Engineering, Electrical Engineering, Systems Engineering +17
Milenko B. Djurić, Z.M. Radojević, Vladimir Terzija · International Journal of Electrical Power & Energy Systems · 1997 · 23 citations