Compatibilization of elastomer‐based blends

Alex da Silva Sirqueira, Márcia G. Oliveira, Mauricio S. M. Almeida

Macromolecular Symposia · 2002 · 21 citations · 0 references

Concepts

Abstract

Abstract The reactive compatibilization of ethylene‐propylene‐diene (EPDM)‐based dissimilar elastomer blends has been investigated in terms of mechanical properties and swelling degree. The use of mercapto‐functionalized copolymers resulted in an improvement of mechanical properties of natural rubber‐EPDM blends. The mercapto‐groups are able to react with the carbon‐carbon double bonds of the high diene rubber, resulting in a good interaction between phases. These interactions were confirmed by the amount of insoluble material obtained in non‐vulcanized blends. From dynamic mechanical properties and swelling degree, one can suggest a covulcanization process in these blends cured with sulfur‐based system. Blends composed by nitrile rubber with EPDM displayed good results in terms of mechanical properties when mercapto‐functionalized EVA was employed instead of functionalized EPDM, probably because of the higher polarity of the former associated to its lower viscosity. Additionally, an improvement on mechanical properties was also achieved by using EPDM functionalized with mercapto or anhydride groups in combination with nitrile rubber functionalized with epoxy or oxazoline groups.