Adsorption Science & Technology · 2001 · 54 citations · 14 references
EngineeringChemical EngineeringChemistryCarbohydrate ChemistrySurface ScienceWater TreatmentAdsorption At InterfacesAdsorption ProcessesCellulose ChemistryIon ExchangeSurface AdsorptionAdsorbent CharacterizationAdsorption CapacityAdsorption ChemistryAdsorption Of DyesCellulose CharacterizationEquilibriumHydrogen BondingNitrogen Content Estimation
The factors influencing the cationization of microcrystalline cellulose with 3-chloro-2-hydroxypropyl triethylammonium chloride in the presence of NaOH were investigated. The course of the reaction was followed by estimating the nitrogen content of the cationized product while its structural features were confirmed by IR analysis. The ability of cationized cellulose to adsorb anionic dyes, viz. Acid Orange 7, Direct Blue 75 and Direct Violet 31, was investigated at 25°C and 50°C. The equilibrium data obtained were fitted by the Langmuir and Freundlich isotherm models, allowing the corresponding adsorption parameters to be determined. The results showed that the adsorption capacity was dependent on the adsorbent, temperature, the nature of the dye and (to some extent) on van der Waals and hydrogen bonding. Cationized cellulose exhibited a much better adsorption capacity towards anionic dyes than cellulose.
14
Fate of water soluble azo dyes in the activated sludge process
Glenn M. Shaul, Thomas Holdsworth, Clyde R. Dempsey et al. · Chemosphere · 1991 · 375 citations
Engineering, Chemical Engineering, Environmental Engineering +13