Performance of North American Bioreactor Landfills. I: Leachate Hydrology and Waste Settlement

Abstract

An assessment of state-of-the-practice at five full-scale North American landfills operating as bioreactors is presented in this two-paper set. This paper focuses on effectiveness of liners and leachate collection systems, leachate generation rates, leachate recirculation practices and rates, effectiveness in moistening the waste, and settlement of the waste over time. Except in one case, the liner and leachate collection systems at the bioreactor landfills were similar to those used for landfills operated conventionally. Leachate generation rates increased approximately linearly with recirculation rate, but in all cases, the leachate generation rate was <300 L/m2 year. Leachate depths generally were maintained within regulatory requirements, even with the highest recirculation rates. Leakage rates from liners at bioreactor landfills, including alternative liner designs employing geosynthetic clay liners, are comparable to leakage rates from conventional landfills. Thus, based on the information gathered in this study, additional requirements or features for liners or leachate collection systems are not warranted for bioreactor landfills. Diminishing capacity of horizontal recirculation trenches is common. Experience at one landfill suggests that small doses at high frequency under substantial injection pressure can deter loss of trench capacity. Only those landfills that were aggressive in recirculation had achieved water contents near the field capacity. Increasing the amount of liquid that is added may be required to achieve field capacity at some landfills, particularly if a final cover is placed soon after waste grades are reached. The rate of time-dependent waste settlement attributed to biodegradation is about 1.6 times larger in bioreactor landfills than in conventional landfills, and increases as the recirculation dosage increases.