Application of Laser Metal Deposition for Fabrication of Titanium Matrix Wear-Resistant Coating and its Wearing Performance

Lan Qin, Guang Yang, Wei Wang, Ming Tong, Xing Liang Wang

Applied Mechanics and Materials · 2010 · 10 citations · 2 references

DOIFull text

Open access

Concepts

Abstract

TiC reinforced titanium matrix functionally graded materials (FGM) has been produced by processes of laser metal deposition through changing the powder feed rate of Ti and Cr3C2 powder. The OM, SEM, EDS methods were used to analyze the components and microstructure of the coatings. Microhardness and wearing resistance at room temperature of the FGM coating were examined by microhardness tester and wear tester respectively. The results show that FGM coating reinforced by in-situ TiC apparently improved hardness of Ti alloy; the microhardness can reach HV1100, and present gradient distribution along deposition direction. Dry sliding wear properties of these FGM coatings have been compared with substrate materials wearing. The observed wearing mechanisms are summarized and related to detailed microstructural observations. The results show the wear resistance of the coating can be improved by 46.6 times.

References

2