IEEE Transactions on Industrial Electronics · 2014 · 65 citations · 27 references
EngineeringElectrical EngineeringMechatronics EngineeringAcousticsUltrasonographyUltrasoundPiezoelectric ActuatorsTransducer TechnologyUltrasonicsUltrasound InstrumentationParallel ResonancePiezoelectric TransducersSeries ResonanceUltrasonic DetectionUltrasonic Piezoelectric ActuatorsUltrasonic Transducers
This paper presents a novel control method for a current-fed full-bridge inverter actuating an ultrasonic piezoelectric transducer (PT). In the conventional ultrasonic detection system, the PT has maximum transmitting gain at its series resonance frequency while having maximum receiving gain at its parallel resonance frequency. With the proposed approach, the PT could have maximum transmitting gain at the parallel resonance frequency and this frequency can be automatically traced, and hence adapted, to the environmental variation. A prototype circuit was constructed to verify the proposed control method. The experimental results show that the receiving voltage signal could have a maximum value at the parallel resonance frequency, and the traced frequency is 0.04 kHz higher than the parallel resonance frequency.
27
Toward energy harvesting using active materials and conversion improvement by nonlinear processing
Daniel Guyomar, Adrien Badel, Élie Lefeuvre et al. · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · 2005 · 1K citations
Engineering, Electrical Engineering, Mechanical Engineering +17
Xuewei Pan, Akshay Kumar Rathore · IEEE Transactions on Industrial Electronics · 2013 · 242 citations
Engineering, Automotive Engineering, Electrical Engineering +17