Electro-Osmosis in Soils

Ing. L. Casagrande

Géotechnique · 1949 · 369 citations · 0 references

Concepts

TL;DR

The study explores diverting pore‑water flow away from cuttings, illustrated with practical examples. The authors constructed a special apparatus to compute and measure electro‑osmotic water‑shift heights by comparing osmotic permeability with hydraulic permeability. Electro‑osmotic water transport is effectively constant across soils, with an osmotic permeability of 5 × 10⁻⁵ cm, and laboratory tests confirm theoretical equilibrium heads shortly after applying voltage, though cracks limit agreement over time; the method also shows energy consumption estimates and a favorable effect on soft‑soil consolidation. Measurements are reported in per second and per volt per centimeter.

Abstract

Summary The present paper shows that, from a practical point of view, the electro-osmotic transport of water may be assumed to be constant for all soils. The magnitude of the osmotic permeability was found to be k e =5 × 10 −5 cm. per sec. for for 1 volt per cm. By comparing k e , with the hydraulic permeability the heights to which the water can be shifted by electro-osmosis were computed and also measured by laboratory tests. For this purpose a special apparatus was constructed. The fact that with colloidal materials agreement between theoretical equilibrium heads and test results exist only for the short interval of time immediately after applying an electric potential was attributed to the development of cracks within the mass of material. The possibility of diverting the flow of pore-water away from cuttings is discussed and illustrated by practical examples. Some indications are given of the magnitude of the required consumption of energy for a few arrangements of electrodes. An explanation is also offered for the favourable effect of electro-osmosis on the consolidation of soft soil deposits.