IEEE Journal of Solid-State Circuits · 2009 · 28 citations · 12 references
EngineeringElectrical EngineeringAnalog ElectronicsMicroelectronicsProcess ControlAnalog Integrated CircuitsCmos Circuit DesignDigital Integrated Circuit DesignDigital Integrated CircuitsDigital Signal ProcessingMixed-signal Integrated Circuit DesignAnalog-digital ConversionAnalog-to-digital ConversionAnalog-to-digital ConvertersCmos Analog Circuit DesignCmos Analog Integrated CircuitsDigital-to-analog ConvertersInput Common-mode RangeLinear Range
Continuous-time ¿¿ modulators (CT-DSMs) that use transistor-based G <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">m</sub> -C integrators are simple but sensitive to process and temperature variations. Their performance depends heavily on the input linear range that varies widely. A CT-DSM is implemented using a triode G <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">m</sub> -C integrator and a tri-level switched-capacitor digital-to-analog converter (SCDAC). A self-scaling SCDAC keeps the input signal range constant, and an adaptive input common-mode bias control enables the triode G <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">m</sub> cell to operate always with its constant input linear range. The proposed G <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">m</sub> cell exhibits a tuning range of ± 15% while maintaining its linear range over the temperature variation from -30°C to 85°C. A 2-MHz bandwidth, fifth-order CT-DSM in 0.18 ¿m CMOS samples at 128 MS/s with an over-sampling ratio of 32 (OSR = 32), occupies an active area of 0.4 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , and consumes 11 mW at 1.8 V. With a -3 dB input of the full scale (400 mV), the measured dynamic range, second harmonic distortion (HD2), and third harmonic distortion (HD3) are 71, -86, and -91 dB, respectively.
12
Gerhard Mitteregger, Christian Ebner, Stephan Mechnig et al. · IEEE Journal of Solid-State Circuits · 2006 · 315 citations
Engineering, Computer Engineering, Electrical Engineering +17