Soil Science Society of America Journal · 1975 · 199 citations · 0 references
Natural SciencesChemistryMaterials ScienceInorganic ChemistryMineralogyPhysical ChemistryAdsorption ProcessesAluminum OxidesIron OxidesMineral ChemistryMineral Surface ChemistrySurface AdsorptionAdsorption At Mineral SurfacesAdsorption On OxidesAdsorption ReactionsMineral Surface AdsorptionPh DependenceSpecific AdsorptionSpecific Ion AdsorptionTrace Element Adsorption
Abstract Freshly prepared Fe and Al hydrous oxide gels and the amorphous product of heating gibbsite selectively adsorbed traces of Ca and Sr from solutions containing a large excess (∼1 M ) of NaNO 3 . The fraction of the added Ca (Sr) adsorbed depended principally on the suspension pH, the amount of solid present, and to a lesser extent on the NaNO 3 concentration. Significant Ca and Sr adsorption occurred on the Fe and Al gels, and heated gibbsite, at pH values below the points of zero charge (8.1, 9.4, and 8.3±0.1, respectively), indicating specific adsorption. The pH (± 0.10) at which 50% of the Ca was adsorbed (pH 50 ) occurred at pH 7.15 for the Fe gel (0.093 M Fe), 8.35 for the Al gel (0.093 M Al), and 6.70 for the heated gibbsite (0.181 M Al); for Sr, the pH 50 values were 7.10, 9.00, and 6.45, respectively. For the Fe gel and heated gibbsite, an empirical model based on the law of mass action described the pH dependence of adsorption reasonably well and suggested that for each Ca or Sr fraction adsorbed, approximately one proton was released. Failure of the Al gel to fit this model may have resulted from its rapid aging.