Characteristics of (Cr<sub>1-x</sub>, Al<sub>x</sub>)N Films Prepared by Pulsed Laser Deposition

Makoto Hirai, Yasuhiro Ueno, Tsuneo Suzuki, Weihua Jiang, C. Grigoriu, Kiyoshi Yatsui

Japanese Journal of Applied Physics · 2001 · 67 citations · 15 references

Concepts

Abstract

Chromium aluminum nitride ((Cr 1- x , Al x )N) films have been successfully prepared by pulsed laser deposition (PLD). Experiments were carried out by changing the surface area ratio of the target (Al/(Cr+Al)) from 0 to 100%. From the results of energy-dispersive X-ray spectroscopy (EDS) and Rutherford backscattering spectroscopy (RBS), we have found that the metal content ratio of the film agreed well with the surface area ratio of the target. The hardness of the (Cr 1- x , Al x )N films showed the maximum value (HV∼3000) at x =0.75. Phase transition from the B1 (NaCl) structure to the B4 (würtzite) structure occurred above x =0.75, which was in reasonable agreement with the theoretical prediction. The result of the oxidation test revealed that the CrN film was oxidized at approximately 600°C, whereas in the (Cr 0.5 , Al 0.5 )N film, the existence of oxide was not detected in the annealing temperature range of RT to 900°C.

References

15