Theory of frequency modulated thermal wave imaging for nondestructive subsurface defect detection

Ravibabu Mulaveesala, Suneet Tuli

Applied Physics Letters · 2006 · 303 citations · 3 references

Concepts

TL;DR

The technique combines the advantages of conventional pulse thermography and modulated lock‑in thermography. This letter develops the theory and mathematical analysis for frequency‑modulated thermal‑wave imaging aimed at nondestructive subsurface defect detection. A specimen is heated over a selected frequency range to launch thermal waves, rather than at a single frequency or all frequencies. The approach lowers peak power requirements while preserving phase‑image advantages, as confirmed by experiments on a carbon‑fiber‑reinforced‑plastic sample.

Abstract

This letter provides the theory and mathematical analysis in support of a recently proposed frequency modulated thermal wave imaging for nondestructive subsurface defect detection in solids. The authors illustrate how the technique simultaneously combines the advantages of both conventional pulse based thermography as well as modulated lock-in thermography. A specimen is heated for launching thermal waves into the sample, not at a single frequency (lock-in) or at all frequencies (pulse), but in a desired range of frequencies. While peak power requirement is reduced, phase images obtained retain known advantages. Experimental results from a carbon fiber reinforced plastic sample are presented in support.

References

3