Industrial & Engineering Chemistry Research · 2002 · 474 citations · 44 references
Life SciencesChemical EngineeringChemistryCarbohydrate ChemistryIndustrial ChemistryReaction EngineeringBiodegradationBiofuel ProductionBiomass ConversionBiomass Energy SystemsCellulose ChemistryOrganic AcidsBiomass CharacterizationChemical Reaction MechanismsDegradationGas-phase ReactionsGasificationLignocellulosic Biomass DegradationSupercritical FluidsTotal Organic Carbon
Biomass is complex, containing many different substances. The study aims to identify and quantify key intermediate compounds in biomass degradation to compare with model compound studies and elucidate reaction pathways. Biomass was degraded at 330–410 °C, 30–50 MPa for 15 min, and key intermediates (phenols, furfurals, acids, aldehydes) along with total organic carbon and gas composition were quantified to compare with hydrothermal upgrading, gasification, and assess the effect of subcritical to supercritical water changes. The key compounds largely mirror pathways seen in model compound studies, though salt effects are significant and complex.
The degradation of biomass is studied in the ranges of 330−410 °C and 30−50 MPa and at 15 min of reaction time. To characterize the chemistry of biomass degradation, key compounds which are intermediates of the biomass degradation are identified and quantified. These key compounds are used to compare the results from earlier studies of model compounds such as, e.g., glucose or cellulose, with biomass degradation in order to identify chemical reaction pathways. Key compounds identified are phenols (phenol and cresols), furfurals, acids (acetic acid, formic acid, lactic acids, and levulinic acid), and aldehydes (acetic aldehyde and formic aldehyde). In addition, sum parameters such as the total organic carbon content and the composition of the formed gas phase are used to describe the biomass degradation. The results are compared with the hydrothermal upgrading process and with the well-known gas-phase gasification processes. The influence of the change of water properties from subcritical to supercritical conditions on the biomass degradation is also discussed. These comparisons show that most of the main reaction pathways detected by the key compounds can be understood by the studies of model compounds. On the other hand, biomass is much more complex because biomass contains a lot of different substances. Especially, the influence of salts is significant and, in addition, rather complex.
44
Bernard M. Kabyemela, Tadafumi Adschiri, Roberto M. Malaluan et al. · Industrial & Engineering Chemistry Research · 1999 · 582 citations