Applied Physics Letters · 2000 · 83 citations · 9 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsOptical MaterialsOrganic ChemistryLight-emitting DiodesLuminescent MaterialsOptoelectronic DevicesOptoelectronic MaterialsOrganic Electronic MaterialsOrganic SemiconductorsElectroluminescenceFluorescent MaterialsFull Width At Half MaximumGreen Light-emitting DiodesOrganic ElectronicsOrganic FluorophoresOrganic Light-emitting DiodesOrganic Light-emitting Materials
A multilayer organic light-emitting diode was fabricated using a fluorescent compound {6-N,N-diethylamino-1-methyl-3-phenyl-1H-pyrazolo[3,4-b]quinoline} (PAQ–NEt2) doped into the hole-transporting layer of NPB {4,4′-bis[N-(1-naphthyl-1-)-N-phenyl-amino]-biphenyl}, with the TPBI {2,2′,2″-(1,3,5-phenylene)tris[1-phenyl-1H-benzimidazole]} as an electrontransporting material. At 16% PAQ–NEt2 doping concentration, the device gave a sharp, bright, and efficient green electroluminescence (EL) peaked at around 530 nm. The full width at half maximum of the EL is 60 nm, which is 60% of the green emission from typical NPB/AlQ [where AlQ=tris(8-hydroxyquinoline) aluminum] device. For the same concentration, a maximum luminance of 37 000 cd/m2 was obtained at 10.0 V and the maximum power, luminescence, and external quantum efficiencies were obtained 4.2 lm/W, 6.0 cd/A, and 1.6%, respectively, at 5.0 V.
9
Organic electroluminescent diodes
Chak Wah Tang, S. A. VanSlyke · Applied Physics Letters · 1987 · 14.3K citations
Natural Sciences, Materials Engineering, Materials Science +17