Journal of Nanomaterials · 2010 · 116 citations · 27 references
EngineeringEnvironmental EngineeringEnvironmental SciencesNanomaterialsWastewater TreatmentWater TreatmentAdsorption ProcessesCarbon NanomaterialsCarbon NanotubesHeavy Metal RemovalNanotubesWater Treatment ChemistryAdsorbent CapacityAdsorbent CharacterizationAdsorption BehaviorAdsorption CapacityAdsorption IsothermsCarbon Nanotube CharacterizationChromium RemediationMulti-walled Carbon Nanotubes
This study was carried out to evaluate the environmental application of modified and nonmodified carbon nanotubes through the experiment removal of chromium trivalent (III) from water. The aim was to find the optimal condition of the chromium (III) removal from water under different treatment conditions of pH, adsorbent dosage, contact time and agitation speed. Multi wall carbon nanotubes (MW‐CNTs) were characterized by field emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM). The diameter of the carbon nanotubes produced varied from 20–40 nm with average diameter of 24 nm and 10 micrometer in length. Adsorption isotherms were used to model the adsorption behavior and to calculate the adsorption capacity of the absorbents. The results showed that, 18% of chromium (III) removal was achieved using modified carbon nanotubes (M‐CNTs) at pH 7, 150 rpm, and 2 hours for a dosage of 150 mg of CNTs. The removal of Cr (III) is mainly attributed to the affinity of chromium (III) to the physical and chemical properties of the CNTs. The adsorption isotherms plots were well fitted with experimental data.
27
Helical microtubules of graphitic carbon
Sumio Iijima · Nature · 1991 · 42.8K citations
The sorption of lead(II) ions on peat
Yuh‐Shan Ho, Gordon McKay · Water Research · 1999 · 1.1K citations
Yanhui Li, Jun Ding, Zhaokun Luan et al. · Carbon · 2003 · 965 citations