IEEE Transactions on Power Electronics · 2013 · 90 citations · 11 references
EngineeringComputer EngineeringElectrical EngineeringAnalog ElectronicsLow-power DesignPower ElectronicsAc-dc ConvertersDc-dc ConversionDc-dc ConvertersDigital Signal ProcessingPower Factor CorrectionPower QualityBoost ConvertersBoost Power Factor Correction ConvertersComparatorsDigital ControlHarmonic DistortionHarmonic ReductionPower FactorTotal Harmonic Distortion
This paper presents a novel mixed conduction mode (MCM) digital controller with a digital signal processor (DSP)-based discontinuous conduction mode (DCM) detection technique to realize total harmonic distortion (THD) and power factor improvements in boost power factor correction (PFC) converters operating in both continuous conduction mode (CCM) and DCM during a single ac line half-cycle. By using the integrated comparators found on many DSPs, simplification and cost-reductions over existing DCM and zero-current detection methods are made possible. Additionally, performance improvements over a conventional CCM digital control technique are possible with simple software modification, and can be extended to existing boost PFC converter designs provided a compatible DSP is present. At an output power of 98 W, an experimental 650 W boost PFC converter operating in the MCM controlled by a TMS320F28035 provides a THD reduction of 40.2% and power factor improvement of 1.5% over a conventional digital controller.
11
Average current mode control of switching power supplies
L. H. Dixon · 1990 · 544 citations
Impact of digital control in power electronics
Maksimović, Zane, Robert W. Erickson · 2004 · 419 citations
Engineering, Computer Engineering, Electrical Engineering +17
K. DeGusseme, D.M. VandeSype, A.P.M. VandenBossche et al. · IEEE Transactions on Industrial Electronics · 2005 · 183 citations