Analysis of Stress Control on 33-kV Non-ceramic Insulators Using Finite-element Method

Abstract

In this article, analysis of electric field stress and electric potential distributions of a 33-kV composite insulator and factors that affect the electric field are discussed. Accordingly, the article is classified into two parts. In the first part, the designs of three different configurations of non-ceramic (composite) insulator based on their geometry modification in end fittings and water shed are discussed. The electrical performances are analyzed using electric field and electrical potential distribution. In the second part, a reduction of the electric field near the end fittings is done to control the electric field stress intended for long-term performance. For that, the grading material is placed between the core and housing materials by fitting the arcing horn near the end fittings. A 33-kV composite insulator is modeled in two dimensions by the finite-element method to investigate the electric field and electric potential distribution under normal and polluted conditions. The results reveal that an optimum installation of an arcing horn at the high-voltage end in the composite insulator with silicone rubber overlapping the edges of metal end fittings made a significant reduction in electric field stress on 33-kV non-ceramic insulators.