Journal of Intelligent Material Systems and Structures · 2012 · 186 citations · 8 references
EngineeringMaterials EngineeringMaterials ScienceActuatorsMagnetic MaterialsMechanical Behavior Of MaterialsActuator MaterialsMagnetic ActuationMagnetic ActuatorsSoft ActuatorsSoft MaterialsMagnetic Field HomogeneityMagnetic Field InhomogeneityMagnetic Field StrengthMagnetorheological MaterialsSilicone Elastomer MaterialsSilicone ElastomersSoft Actuator MaterialsValve Control
Magnetorheological elastomers deform reversibly under inhomogeneous magnetic fields due to competing magnetic and elastic forces, offering larger deformations than rigid actuators, and simulations show that field inhomogeneity—and thus actuation—depends strongly on magnetic yoke shape. The study investigates the actuation behavior of soft silicone-based magnetorheological elastomer rings in variable magnetic fields, demonstrating their use in a valve-type device to control air flow. Rings of varying Shore hardness, isotropic and anisotropic magnetic particle arrangements were fabricated and incorporated into a valve, whose closing characteristics across different yoke shapes were assessed by measuring air flow versus magnetic field strength. The air flow through the valve can be controlled by the current in the field‑generating coil, establishing a basis for a new type of magnetic valve.
The actuation behavior of soft silicone-based magnetorheological elastomers in magnetic fields of variable strength was investigated. An inhomogeneous magnetic field gives rise to a reversible actuation effect, which is the result of the competition between magnetic and elastic forces in the material. Magnetorheological elastomers are capable of performing more pronounced deformations than known rigid actuator materials. In this article, the actuation behavior of magnetorheological elastomer ring-shaped bodies in a valve-type device for the control of an air flow is demonstrated. For this purpose, magnetorheological elastomer rings with different Shore hardness were prepared and used in the valve. In addition to the common isotropic magnetorheological elastomer samples, rings with an anisotropic arrangement of the magnetic particles were also prepared. The actuation of these anisotropic magnetorheological elastomers was compared with that of the isotropic samples. Based on simulations, the inhomogeneity of the magnetic field at the magnetorheological elastomer material which is required for the actuation could be strongly affected by the shape in the design of the magnetic yoke. In this study, the closing characteristics of the valve with different yoke shapes and magnetorheological elastomer materials were evaluated by measuring the dependence of the air flow rate on the magnetic field strength. It is demonstrated that the air flow through the valve can be controlled by the current in the field-generating coil, which yields the base for a new type of magnetic valve.
8
Mark Jolly, J. D. Carlson, Beth Muñoz et al. · Journal of Intelligent Material Systems and Structures · 1996 · 525 citations
Natural Sciences, Materials Engineering, Materials Science +17