Structural and Magnetic Properties of Permalloy Films

J. C. Lloyd, Robert Smith

Journal of Applied Physics · 1959 · 46 citations · 1 references

Concepts

Abstract

The wall motion coercive force Hc and the rotational coercive force Hr of thin electroplated nickel-iron films are studied as a function of film roughness. Three types of roughness are considered : the first, periodic with a wavelength large compared to a domain wall width and an amplitude small compared with the film thickness; the second, of the order of size of a domain wall; and the third, a substrate roughness that is large compared to the film thickness. H c was found to be related to film thickness according to Hc = CsD+n. This observation was predicted by Néel, except that his assumption of a form of roughness only of the first kind led to a single value for n of −43. Electron micrographs showed that roughness of the second kind increased with film thickness, indicating that n depends on this factor. Roughness of the third kind, as introduced by unidirectional polishing, results in an increase of Cs, while n and Hr are not affected. This third type of roughness was observed to orient the easy magnetic axis parallel to the polishing grooves.

References

1